| Author |
Message |
martin_legionowo
|
|
Post subject: How to connect to the EN5861 via HTTP
 Posted: Sep 21, 2007 - 12:13 PM
|
|
Starting Bug
Joined: Sep 21, 2007
Posts: 4
Status: Offline
|
|
Hello,
I cannot connect to the EN5861 via HTTP, telnet.
I have EN5861 P/N - 060-5861-F36. Modem comes
from Britain - could be BT modem.
Modem has IP - 192.168.254.254 but I cannot
connect via telnet and HTTP - it looks like
it doesn't have open these services - it answer
only for ping. I set 192.168.254.1 IP address for a laptop because also DHCP on modem has disabled.
I don't have console cable.
Is it any tricks to connect to this modem without
console cable in this scenario ?
Any helps would be appreciated !
Best Regards,
Marcin |
|
|
| |
|
|
|
 |
|
eusty
|
|
|
Post subject: RE: How to connect to the EN5861 via HTTP
Posted: Sep 22, 2007 - 12:53 AM
|
|
Bug Admin
Joined: Aug 28, 2003
Posts: 1101
Location: King's Lynn
Status: Offline
|
|
Netboot the router then you should be able to connect to it, then you can remove the BT 'locking'
system snmpport default
system telnetport default
system deltelnetFilter 194.72.0.0 194.72.32.255
system deltelnetFilter 194.74.75.0 194.74.75.255
del autoexec.old
remote del bt
save
sync
reboot |
_________________
Steve
www.uk-bug.net
|
| |
|
|
|
|
|
martin_legionowo
|
|
|
Post subject: RE: How to connect to the EN5861 via HTTP
Posted: Sep 25, 2007 - 12:32 PM
|
|
Starting Bug
Joined: Sep 21, 2007
Posts: 4
Status: Offline
|
|
Hello,
thanks for help but during the POST phase - it looks like modem
doesn't want boot via BOOTP protocol - it doesn't send BOOTP
request always boots from flash only. May you tell me if we
can we change the sequence - the first via BOOTP secend from flash ?
Best Regards,
Marcin |
|
|
| |
|
|
|
|
|
TheBoy
|
|
|
Post subject: RE: How to connect to the EN5861 via HTTP
Posted: Sep 29, 2007 - 08:49 PM
|
|
Bug Mod
Joined: Jun 24, 2004
Posts: 550
Location: Northamptonshire UK
Status: Offline
|
|
|
|
|
|
|
martin_legionowo
|
|
|
Post subject: RE: How to connect to the EN5861 via HTTP
Posted: Oct 02, 2007 - 09:38 AM
|
|
Starting Bug
Joined: Sep 21, 2007
Posts: 4
Status: Offline
|
|
Hi,
thanks for link to the page with information how do it,
but in my opinion there is a mistake :
copy tftp@192.168.254.254:asic.aic asic.aic (only for 5861)
should be :
copy tftp@192.168.254.100:asic.aic asic.aic
Obviously when we have TFTP server on 192.168.254.200 machine.
Am I right ?
Best Regards,
Marcin |
|
|
| |
|
|
|
|
|
TheBoy
|
|
|
Post subject: RE: How to connect to the EN5861 via HTTP
Posted: Oct 02, 2007 - 06:33 PM
|
|
Bug Mod
Joined: Jun 24, 2004
Posts: 550
Location: Northamptonshire UK
Status: Offline
|
|
| Yes, typo. Sorry |
_________________
TheBoy
2Mb Zen ADSL with 16 IPs
6.3Mb BT MaxDSL with dynamic IP
Hosting http://www.omegaowners.com from Zen ADSL
|
| |
|
|
|
|
|
martin_legionowo
|
|
|
Post subject: Thanks for help
Posted: Oct 07, 2007 - 02:25 AM
|
|
Starting Bug
Joined: Sep 21, 2007
Posts: 4
Status: Offline
|
|
Hi,
finally I did it, everything is ok, I had to upgrade firware via Configuration Manager. When I upgrade via TFTP then always it boot from net not from the flash. After upgrade via Configuration Manager it boots from the the flash properly.
So, thanks TheBoy and eusty for your help !
Best Regards,
Marcin |
|
|
| |
|
|
|
|
|
|
FAQ
Search
Register
Log in to check your private messages
Log in
